Fog Machine Cleaning Tip
Posted: Saturday, July 30, 2011 19:30 PST | 1 Comment (see below)
When your fog machines begin sputtering and the output is just not as strong as it used to be, it may need its plumbing flushed out. You can do this yourself, by using the following instructions:
Do this by removing the fog fluid reservoir from the machine, and emptying it out. You can save the fluid if it isn't dirty. Mix a solution of white vinegar and distilled water, with a ratio of 1 part vinegar to 8 parts water, which would be approximately 2 tablespoons of vinegar in 1 cup of distilled water. This should be enough cleaner for 1 fog machine.
Why distilled water? Distilled water has its minerals removed. Minerals are bad for fog machines as they tend to coat the inside of the tube, reducing it's diameter and therefore reducing the fog machine's output.
Rinse the fog fluid reservoir out with distilled water. Pour the cleaning solution into the fluid tank. Take the fogger outside. When the fogger is ready, run it (long bursts, but not continuously) until...
Read the rest of this entry »
|1 Comment to "Fog Machine Cleaning Tip"|
AV Hire Gold Coast Says:
11/12/2013 9:38:00 PM
Excellent Fog Machine Cleaning to remove fog fluid reservoir..